Feelworld FW1018SPV1 10.1″ IPS Full HD 3G-SDI HDMI On-Camera / Field LED Monitor with Built-In Speaker, 1920×1200

About Feelworld FW1018SPV1 The Feelworld FW1018SPV1 10.1″ IPS Full HD LCD On-Camera monitor is one of the best monitors of its kind. Thanks to FEELWORLD’s good price-quality ratio, many professional photographers and videographers choose for FEELWORLD. The monitor also features image measurement functions like Focus Assist, Brightness Histogram, False Color, Zebra Exposure, Center Marker, Safe Frame, Check Field, Camera Mode, Aspect Ratio, Image Flip, Pixel-to-Pixel and Image Freeze you will be able to analyze the image. These functions are assignable across six function buttons on the front panel. The large size 10.1 inch enables you to focus clearly on your shots and eliminate the guesswork from framing. It blows up your tiny built-in camera screen to a much larger display that enables easier viewing and won’t strain your eyes. With brightness levels of 320cd/sq. m, a 800:1 contrast ratio and 170deg. vertical and horizontal viewing angles this monitor is a useful tool when shooting video or stills, providing you with a larger image than your camera’s built-in viewfinder or LCD screen. FW1018SPV1 provides maximum versatility with multiple inputs: HDMI, 3G-SDI, YPbPr, Video, Audio(L/R) and HDMI, 3G-SDI, YPbPr, Video loop-through output, you can connect it directly to any DSLR or HD video. 1920×1200 IPS FHD Panel Enjoy Consistent Images from Any Perspective. FW1018SPV1 uses an IPS panel, which provides a wide 170deg./170deg. viewing angle and brightness output, up to 320cd/sq. m. This means you’ll be able to see accurate, consistent and bright images from any viewing point. Professional Peaking Focus Assist The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, the internal processor will display a colored highlight on the screen where sharp edges appear. You can switch the putline color between red, green, blue according to different tone of the subject. 3-color Tally Light DB-9 input signal There is front Tally lights with 3 colors display and controlled via DB-9 ports on the rear panel. Flexible Battery System The monitor is powered from 4-pin XLR connector or 12V DC input with the included power adapter and FW1018SPV1 has flexible battery system that supports F970, LP-E6, D28S, Anton, Sony V mount plates of your choice. Brightness Histogram The Brightness Histogram is a quantitative tool to check the picture brightness. The feature shows the distribution of brightness in an image as graph of brightness along the horizontal axis (Left:Dark, Right:Bright)and a stack of the number of pixels at each level of brightness along the vertical axis. Embedded Audio Monitoring The Audio Level Meters provide numerical indicators and headroom levels. It can generate accurate audio level displays to prevent errors during monitoring. The audio meter is green and will turn yellow when exceeds -20dB and turn red when exceeds -9dB. Peaking Focus Assist The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, the internal processor will display a colored highlight on the screen where sharp edges appear. You can switch the putline color between red, green, blue according to different tone of the subject. False Color The False Color filter is used to aid in the setting of camera exposure. As the camera Iris is adjusted, elements of the image will change color based on the luminance or brightness values. This enables proper exposure to be achieved without the use of costly, complicated external test equipment. Exposure (zebras) The Exposure is used to assist in exposure adjustment in the mode of Zebra Pattern. It is considered overexposed and displays the moving warning lines onto the over exposed areas. 1-100IRE adjustable. Check Field Check Field is an assistant function to adjust camera color settings. Under the check field mode, you can use red, green, blue or mono pixels to generate the image, because hue and saturation can be adjusted more quickly and accurately in this environment. Camera Mode Function It will be full screen under camera mode. Zoom In (4X, 9X, 16X) Image magnification is HD signal in any part, an amplification for high quality close-up. Anamorphic Mode Built-in selection of no squeeze, 1.3x or 2.0x allows you to use anamorphic lenses or adapters and see the image unsqueezed, even if your camera does not de-squeeze in camera. Image Flip The Horizontal, Vertical and Hor&Ver of the image around flip. Nine Grid Zoom one of the images to realize the full screen. You can switch the Mark color between Red, Green, Blue, White, Black according to different tone of the subject. Pixel to Pixel Enable the filmmaker to check the image from the 1:1 signal source without scaling. This feature is essential for capturing optimum detail. Center Marker & Safe Marker Safe Mark for View Finding and Composition (80%, 85%, 90%, 93%, 96%, 2.35:1). You can switch the Mark color between Red, Green, Blue, White and Black according to different tone of the subject. Ratio Marker (4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1). Frame blanking zone includes 6 Levels, from 0-6 (Transparent to Black). You can switch the Mark color between red, green, blue, white and black according to different tone of the subject. Feelworld FW1018SPV1 Features Wide view angle IPS Screen, High resolution 1920×1200, bright, colorful display High Contrast: 800:1 High Brightness: 320cd/sq. m 160 deg. wide viewing angles IPS Panel 3G-SDI, HDMI, YPbPr, Video, Audio (L/R) inputs and 3G-SDI, HDMI, YPbPr, Video loop-through outputs Histogram Peaking Focus Assist (Red, Green, Blue three colors optional highlight over parts of the image in focus) False Colors Zebra Exposure Nine Grid (Zoom one of the images to realize the full screen) (Nonsupport in 4K input) Embedded Audio Meter Camera Mode Zoom (4x, 9x, 16x) (Nonsupport in 4K input) Anamorphic Mode (1.3x, 2.0x, 2.0x mag) Pixel to Pixel (Nonsupport in 4K input) Center Marker Safe Area (80%, 85%, 90%, 93%, 96%, 2.35:1) Ratio marker (4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1) Marker Color (Red, Green, Blue, White, Black) Check Field (Red/Green/Blue/Mono) Image Flip (H, V, H/V) Image Freeze Zoom All (Nonsupport in 4K input) U/D & L/R Zoom (Nonsupport in 4K input) Color Temperature Adjustment Aspect Ratio (Nonsupport in 4K input)