Ambient Recording Clockit LEMO 5-Pin to BNC Output Cable for Ambient Timecode Devices, 3 O’clock Orientation/90 Degrees, 16″

About Ambient Recording Clockit Output Cable Knowing a chain is always just as strong as its weakest link, Ambient pays the greatest attention to what is often neglected and dealt with low priority. Requirements for location equipment differ considerably from stage applications. Still, most suppliers provide cables exclusively for that purpose. Though thin in diameter, the polyurethane coating gives the cables an exceptional robustness and retains flexibility and integrity over a wide temperature range, making it the ideal choice for rough outdoor use. Cord supported stranded wires and braided shielding add to the mechanical strength and assures best signal immunity against interference of any kind. Timecode output cable with Lemo 5-Pin RA, outlet 3 o’clock, to BNC RA Since different Lemo connectors are needed for differing cable outlet directions, it is mandatory to specify the required direction of the cable outlet. The direction of outlet cannot be changed. Signal flow / wiring from Lemo to BNC connector. The cable is designed for use with Timecode Devices. Ambient Recording Clockit Output Cable Features Lemo 5-Pin 90 right angle to BNC 90 right angle Signal flow / wiring from Lemo to BNC connector Viewing the plugged connector from back with the red dot on top, 3 o’clock (90 degrees). LEMO outlet orientation at 3 o’clock