About this item Advanced power measurement device for graphics cards with 12VHPWR connector OLED display for real-time power consumption data Measures and records power usage, voltage, and current Internal and external temperature sensors for comprehensive monitoring Audible alarm for temperature or current limit exceedance Connector detection for 150W, 300W, 450W, or 600W cables 60-second measurement cycle for quick power consumption analysis Show more Product Description Thermal Grizzly WireView PRO GPU 1x12VHPWR The WireView Pro GPU is a device for measuring the power consumption of graphics cards. As a Pro version, it is also equipped with connector detection, temperature sensors, and an audible alarm. The measured data is displayed on an OLED screen. The following values can be displayed Current power consumption in watts (W) Current voltage in volts (V), current in amperes (A) Minimum and maximum power consumption in watts (W) Average power consumption over 60 seconds (RAVG in W) and total power consumption (E in WH) Measured temperatures of individual temperature sensors (°C) The WireView Pro GPU is an advanced version of the device for measuring and monitoring the power consumption of graphics cards. Developed in collaboration with Jon “elmor” Sandström, the WireView Pro GPU connects to the 12VHPWR power connector of the graphics card and is linked to the power supply through the power cable. Power consumption data is displayed on an OLED screen. The Pro version has been enhanced with connector detection and temperature sensors. An added buzzer provides an audible warning if the adjustable temperature or current limit is exceeded or if the cable is not correctly connected or if an incorrectly specified cable is used. Characteristics Material (cover): Aluminum, anodized Color: Black Display type: OLED 12VHPWR 16-pin power connector (4x sensor + 12x power/ground) What does the WireView Pro GPU do? The WireView Pro GPU enables the measurement and monitoring of power consumption from graphics cards through the 12VHPWR power connector and records this data to determine power usage. This data can be used to calculate the power cost of a graphics card or to compare the power consumption with other graphics cards. A special 60-second measurement cycle provides a quick and convenient display of power consumption, making it especially useful for reviews. At the same time, it can be used to assess power consumption over a specific period or in certain applications. Additionally, it can detect power peaks that occur during the operation of current high-end graphics cards. Why the Pro upgrade? The Pro version has been upgraded with connector detection, temperature sensors, and an audible warning signal. The connector detection identifies whether a 150-watt, 300-watt, 450-watt, or 600-watt specified cable is used. Please note that the WireView Pro GPU only measures power consumption through the power connector, not through the PCIe slot of the motherboard. If an incorrect cable is used or is not properly connected, an audible warning will sound. Two temperature sensors, located on the board at the power connectors, monitor the temperatures there. Up to 600 watts of power can flow through the connectors, which can cause them and the board around them to heat up significantly. An audible alarm will sound if the temperature exceeds an adjustable limit. Two additional included temperature sensors (10K NTC) can be connected via cables. Two sensors with cable lengths of 5cm and 20cm are included. The alarm can also be triggered if the adjustable current limit (amps) is exceeded. “N” Normal -Variant If the graphics card has power connectors where the four sensor pins are located between the PCB and the 12 power pins, the “N – Normal” version is required (PCB – 4x sensor pin – 12x power pins). “R” Reversed -Variant If the graphics card has power connectors where the 12 power pins are located between the PCB and the four sensor pins, the “R – Reversed” version is required (PCB – 12x power pins – 4x sensor pin). OLED display Power consumption measurement Power consumption recording Internal temperature sensors at the power connectors External temperature sensors Pin detection for sensor-pin connectors Alarm function Optimized cable management Product information Product Dimensions 1.96 x 1.65 x 0.1 inches Item Weight 2.47 ounces Manufacturer Thermal Grizzly ASIN B0DJ7PVB7S Country of Origin Germany Item model number 1x12VHPWR Normal Best Sellers Rank #715 in Computer Graphics Cards Date First Available September 29, 2024 Warranty & Support Product Warranty: For warranty information about this product, please click here Feedback Would you like to tell us about a lower price?
